Container shop shelving: layouts for 20 ft and 40 ft containers
A container shop is narrow and long: about 2.35 m wide inside, with a ceiling at around 2.39 m. So shelving goes along both long walls with an aisle down the middle; a double-sided row won't fit. By the calculator's rules:
| Container (inside, approx.) | Shelving | UZS |
|---|---|---|
| 20 ft: 5.9 × 2.35 m | 7 wall units + 2 corner units | 11,882,000 |
| 40 ft: 12 × 2.35 m | 19 wall units + 2 corner units | 25,606,000 |
Prices as of 14 November 2026; price holders and other accessories are extra.
A narrow aisle: walls only
- Wall shelving along both long walls. A 35/30 system unit takes about 45 cm from the wall, so even with units on both sides there is an aisle of almost a metre and a half down the middle.
- No row in the middle. A double-sided unit with an aisle on each side doesn't fit across a container.
- On the back wall: corner units and one short unit (L80). An inner corner unit puts the corner space to use too.
- Room for a counter by the entrance. The calculator leaves the entrance end of the container free; the seller stands there.

A low ceiling: which height
- H195 is the most comfortable. In a standard container the ceiling is around 2.39 m, so a 195 cm unit leaves room above it for light and air, and the top shelf is within easy reach.
- H225 fits, but leaves only about 15 cm to the ceiling, which makes the top shelf awkward to stock. In a High Cube container the ceiling is about 2.69 m, and H225 works well there.
- Lower units (H165 or H135) near the entrance make the container feel more spacious.
All heights: Shelving sizes.
Damp and heat
A metal container heats up in summer and cools down in winter, and moisture can build up inside. Shelving is for dry rooms: use in damp places isn't covered by the warranty. So insulate and ventilate the container before you open, and wipe any moisture off the shelves. More detail: Metal shelving care.
How to lay out the goods
- Best-sellers in the middle and at eye level. Customers step inside and see both walls at once.
- Heavy goods on the bottom shelf, light and cheap ones higher up.
- For small goods, shelves with hooks and baskets save space: Accessories for small goods.
- A price holder on every shelf (L120 — 12,000 UZS), so in a tight space customers don't have to ask for prices.
- Little room for back stock: bring goods in more often, in small batches.
Example: a 20 ft container
Inside 5.9 × 2.35 m (13.9 m²), with the entrance in the short wall. By the calculator's rules: three L120 on each side wall, one L80 on the back wall and inner corner units in both corners.
| Calculator total, 35/30 | Qty | UZS |
|---|---|---|
| Wall shelving H195 | 7 | 8,758,000 |
| Inner corner shelving H195 | 2 | 2,572,000 |
| Uprights at the row ends | 3 | 552,000 |
| Total | 11,882,000 |
In a 40 ft container (12 × 2.35 m), nine units fit on each side wall: five L120, one L100 and three L90. The back wall and corners are as in the 20 ft one, 25,606,000 UZS in total.
Joining two containers
Put two containers side by side and cut out the wall between them, and the width becomes about 4.7 m, enough for one double-sided row in the middle. Cutting the wall affects the container's strength, so leave that job to a specialist. By the calculator's rules:
| Joined containers | Shelving | Price, UZS |
|---|---|---|
| Two 20 ft (5.9 × 4.7 m) | 9 wall, 3 double-sided, 2 corner | 20,152,000 |
| Two 40 ft (12 × 4.7 m) | 21 wall, 8 double-sided, 2 corner | 44,164,000 |
Next step
If the door is in a long wall of the container, the layout changes. Tell us the dimensions and where the door is, and in a free 2D/3D layout we'll work out the layout and price. Shelving: Wall Shelving, Inner Corner Shelving.
Useful guides
All guides


Metal shelving prices
Quick estimate
Enter the length of a wall or a row to see which shelving fits and what it costs. You can also get a rough layout from the room size.

