KingRax Guides How to work out the length of a shelving run

How to work out the length of a shelving run

Work out a wall shelving run to the centimetre: the L size, +3 cm for the last upright, main and filler lengths, the corner unit and the number of uprights.

Jalol Murad, KingRax General Manager 13.11.2026

What L means

The length of a unit, L, is the distance from the start of one upright to the start of the next. There is one more upright at the end of a run, so:

run length = sum of all L + 3 cm

The same applies to a single unit: an L100 unit takes 103 cm along the wall.

Nam Asfalt (wet asphalt) wall shelving with red price holders
Nam Asfalt (wet asphalt) wall shelving with red price holders

An example

The wall is 460 cm long. Three L120 units and one L90: 3 × 120 + 90 = 450 cm, or 453 cm with the last upright. The remaining 7 cm is split equally between the two ends of the run — 3.5 cm on each side.

Which lengths to prefer

  • Main lengths — L120, L100 and L90. They cost less: fill the run with them as far as possible.
  • Fillers — first L80 and L70, then L60 and L50. They are added only when a run cannot be filled with main lengths, and the fewer the better.
  • A run of main lengths only is better than adding a filler, even if it leaves a 10–15 cm gap.
  • Each end of a run keeps 3–15 cm to the wall or the next run; a gap over 10 cm is worth a second look.

The inner corner unit

Where the shelving of two walls meets, an inner corner unit can go in the corner. It takes 75 cm along each wall, including its own upright: in a 300 × 300 cm room, 225 cm is left on each wall. The corner unit is the same height as the wall units next to it. Without a corner unit, one wall's run goes into the corner and the other wall's run starts after the depth of the first.

Number of uprights

Wall, inner corner and double-sided sets each contain one upright, so every run needs one additional upright: a run of four sets has 5 uprights, for example. An end-cap set contains 2 uprights — it is a run on its own.

Let us do the maths

Or send a request and a manager will work it out.

Useful guides

All guides

Metal shelving prices

H — height, L — length, W — width, D — shelf depth; sizes in centimetres.

Quick estimate

Enter the length of a wall or a row to see which shelving fits and what it costs. You can also get a rough layout from the room size.

Free 2D/3D Layout Leave a request