Car repair workshop shelving: tools, oils and removed parts
In a car repair workshop, shelving keeps three things in order: parts removed from cars under repair, oils and car chemicals, and tools and consumables. The main rule: each car's parts sit in their own numbered place and never get mixed up with another car's parts.
| What | Where |
|---|---|
| Removed and new parts | Warehouse rack next to the lift, a numbered place for each car |
| Oils and car chemicals | Apart from the parts, bottom level only |
| Tools and consumables | Home and office unit by the bay |
| Wash bay | No shelving: use in a damp place is not covered by the warranty |
Warehouse shelving from 1,102,000 UZS, home and office shelving from 796,000 UZS (prices as of 19 November 2026).

Removed parts: a numbered place for each car
The mechanic takes a part off the car and puts it in that car's place on the rack. New parts for the repair go to the same place. When putting the car back together, the mechanic takes everything from one spot: nobody hunts for a part, and nothing ends up on another car. That is why this rack stands close to the lifts, with an aisle in front wide enough to carry a part through easily: Warehouse aisle width.
- Number the places. A warehouse rack in the L200 size has 4 levels with 2 shelves on each: give one car one shelf and a single rack holds 8 places. A car in for a major repair gets a whole level. Stick the number on the front beam of the level.
- The place number goes on the job card. When a car is booked in, it gets a free place and the number is written on the paperwork. The label on the place shows the car's number plate and the date it came in.
- Small parts in a bag or box. Bolts, nuts, clamps and washers go into a bag or box marked with the car's number and stay in the same place: nothing gets lost during reassembly.
- One place, one car. Parts from two cars never share a shelf. Once the car has been handed back, the place is cleared and given to the next one.
- Old parts stay until handover. Replaced parts are shown or returned to the customer, so they stay in their place until the car leaves.
- Heavy parts low, light and small ones higher up. Do not lift heavy units such as an engine or a gearbox onto an upper level by hand.
Which warehouse rack
Removed parts vary in weight, so the type is chosen by the heaviest part: light-duty, medium-duty or heavy-duty racks. Tell the manager which parts are the heaviest in your workshop, and they will recommend the right type. How the types differ: Choosing warehouse shelving. Depth: light-duty 50 cm, medium- and heavy-duty 60 cm; length 120, 150 or 200 cm.
There is no special rack in the catalogue for large body parts such as a bumper, a door or a bonnet: give the size and ask through the Custom-size shelving page.
Oils and car chemicals: apart and low
Oil, antifreeze, brake fluid and car chemicals never share a shelf with removed parts.
- A separate rack. Give liquids a rack of their own. If they have to stand on the parts rack, use the bottom level only: even if something leaks, it will not run onto the parts.
- Heavy cans on the bottom level, small containers and aerosols higher up. A heavy can is easier and safer to lift on and off a low shelf.
- Used oil apart. Drained oil and old filters are kept in closed containers, away from new oil and clean parts.
- Away from heat. Aerosols and flammable liquids are stored away from the welding area, heaters and open flames.
- No open containers. Close every container and wipe up spills at once: an oily shelf and floor are slippery.
Tools and consumables
- A unit of its own by every lift. Home and office shelving: 180 or 200 cm high, 100 or 120 cm long, 30 or 40 cm deep. The deeper W40 suits tool boxes better: Home and Office Shelving H200/L100/W40 — 980,000 UZS.
- A place for everything. Spanner sets, the diagnostic tool, gloves and rags always live in the same place, with a label on the shelf. At the end of the day everything goes back, so anything missing shows at once.
- Consumables in boxes. Clamps, fuses, bulbs and washers — one kind per box, with the name written on it.
- Frequently used items at hand height, heavy boxes on the bottom shelf.
If you keep a large stock of spare parts, it belongs in a separate room rather than by the bays: Auto parts warehouse shelving. For customers' tyres: Tyre shop shelving.
Damp, impacts and the warranty
- No shelving in the wash bay. The wash bay and the area around the parts-washing tank are always damp: a rack used in a damp place is not covered by the warranty. Keep racks in the dry part of the workshop.
- Keep the space in front of the lifts and gates clear. A car reversing or turning must not touch the rack: an impact from a car or a trolley is not covered by the warranty either.
- No welding or drilling. Even if the workshop has a welder, do not weld hooks or brackets to the rack: cutting, welding and drilling void the warranty.
- A level floor and fixing. The rack stands on a level floor, is assembled according to the instructions and fixed in place. Do not drop heavy parts onto a shelf, and spread the load evenly along it.
The KingRax warranty lasts 12 months and covers the rack's ability to carry the maximum load stated on the warranty card. Details: Shelving warranty and Assembling and using shelving safely.
Example: a two-lift workshop
Along the back wall, two Medium-Duty Racks H200/L200/W60 for removed parts: a run of about 4 metres with 8 levels and 16 places. The second rack shares an upright with the first, so it is bought as an add-on section — details: Warehouse shelving runs. A separate light-duty rack holds oils and chemicals, and a home and office unit next to each lift holds the tools.
| Product | Qty | UZS |
|---|---|---|
| Medium-Duty Rack H200/ | 1 | 2,205,000 |
| Add-on section, medium-duty L200 | 1 | 2,020,000 |
| Light-Duty Rack H200/ | 1 | 1,102,000 |
| Home and Office Shelving H200/ | 2 | 1,960,000 |
| Total | 7,287,000 |
Prices as of 19 November 2026. If you have many heavy parts, take heavy-duty racks instead of medium-duty: a full set H200/L200/W60 costs 3,185,000 UZS and an add-on section 2,839,000 UZS. All sizes and prices: Shelving prices.
Next step
Send us the size of the workshop and tell us where the lifts, gates and wash bay are — in a free 2D/3D project we will work out the layout and the price of the shelving. In Tashkent and Samarkand a specialist measures the room for you: Measuring and installation. If you also sell parts: Auto parts shop shelving.
Useful guides
All guides


Metal shelving prices
Quick estimate
Enter the length of a wall or a row to see which shelving fits and what it costs. You can also get a rough layout from the room size.