KingRax Guides Tyre shop and tyre fitting shelving: how to store tyres

Tyre shop and tyre fitting shelving: how to store tyres

Tyres are stored on warehouse racks: 50 or 60 cm deep, 120, 150 or 200 cm long and 200 to 300 cm high. Tyres without rims stand upright in a row on the shelf; tyres on rims (wheels) lie flat in stacks. How many tyres fit on a shelf is a simple division: shelf length ÷ tyre width.

Doston J, KingRax Warehouse Manager 15.11.2026
Light-dutyMedium-dutyHeavy-duty
Depth (W)50 cm60 cm60 cm
Height (H)200 cm200, 250, 300 cm200 cm
Levels444
Pricefrom 1,102,000 UZSfrom 1,838,000 UZSfrom 2,818,000 UZS

Prices as of 15 November 2026.

Warehouse shelving set in a corner: blue uprights, orange shelves, 4 levels
Warehouse shelving set in a corner: blue uprights, orange shelves, 4 levels

Which rack you need

  • Type — by load. Load per level = number of tyres × weight of one tyre. Tyres without rims, wheels, small sizes and large ones all weigh differently. Give this figure to the manager and he will suggest the type: light-duty, medium-duty or heavy-duty. How the types differ: Choosing warehouse shelving.
  • Depth — by tyre diameter. A tyre whose diameter is larger than the shelf depth sticks out at the front and back. On the 60 cm deep medium-duty and heavy-duty racks a large tyre sticks out less, while the 50 cm light-duty rack fits into a narrow space.
  • Height — by the ceiling and the tyre size. The medium-duty rack comes as H200, H250 and H300, each with 4 levels. An upright tyre must fit between the levels in height: before ordering, tell the manager the width and diameter of your tyres.
  • Length — L200. On a long rack a metre of run costs less: for the medium-duty H200 rack, a metre costs about 1.53 million UZS at L120 and 1.10 million UZS at L200.

The catalogue has no dedicated rack for truck and special-vehicle tyres: note the tyre size and ask via the Custom-Size Shelving page.

Tyres without rims and wheels: how to store them

Without rims — upright

  • They stand side by side on the shelf, upright on the tread.
  • From time to time — roughly once a month — turn them a little so that a tyre does not always rest on the same spot.
  • Do not keep them stacked for long: the bottom tyres lose their shape under the weight.
  • Do not hang them on hooks: the weight falls on one point and the tyre deforms.

On rims (wheels) — lying flat

  • Lay them flat in stacks; a stack should fit easily between the levels.
  • Keep the 4 wheels of one car together: in one stack or side by side.
  • Do not leave them upright for long: the weight of the rim keeps pressing on the bottom of the tyre.
  • The heaviest wheels go on the bottom level.

For both

  • A dry, cool and fairly dark place, away from sunlight and heaters.
  • Away from oil, fuel and solvents.
  • Do not put a wet tyre on the rack: dry it first. Metal shelving is also meant for dry rooms.

How many tyres fit on a shelf

The calculation is simple: shelf length ÷ tyre width, rounded down to a whole number. The width is the first number in the size marking: a 205/55 R16 tyre is 205 mm, or 20.5 cm, wide. The number after R is the rim diameter in inches. On an L200 shelf: 200 ÷ 20.5 ≈ 9.8, so 9 tyres.

Tyre widthL120L150L200
175 mm6811
195 mm6710
205 mm579
225 mm568

This is one row of upright tyres on one level. The figure is approximate: leave a little space between the tyres and they are easier to take out and put back.

Example: the price of a 6-metre run

Along a wall of about 6 m we put 3 racks H200/L200. A warehouse rack set comes with 2 uprights, and racks standing side by side share an upright. So the run is built from 1 full set and 2 add-on sections — details in Warehouse shelving runs.

Type1 full set + 2 add-on sectionsTotal, UZS
Light-duty1,470,000 + 2 × 1,338,0004,146,000
Medium-duty2,205,000 + 2 × 2,020,0006,245,000
Heavy-duty3,185,000 + 2 × 2,839,0008,863,000

Prices as of 15 November 2026. One level of such a run holds 27 tyres 205 mm wide (3 × 9). All sizes and prices: Shelving Prices.

Order in the shop, the storeroom and the fitting bay

  1. Arrange by size: first by rim diameter (R13, R14, R15 and so on), then by width. Stick a size label on the beam of every level.
  2. Separate by season: summer, winter and all-season tyres on separate racks.
  3. Fast-selling sizes near the entrance or the counter, slow sellers and reserve stock in the back rows.
  4. Heavy goes low: the heaviest tyres and wheels on the bottom level, lighter ones higher. Use a stepladder to reach the top level of a tall rack.
  5. Aisles wide enough to roll a tyre through. Rough figures: Warehouse aisle width.
  6. If you store customers' tyres, tag every set: the owner's name and phone number, car registration number, tyre size and the date received. Give every spot an address — aisle, rack and level (for example, B-2-3) — and record it in a logbook or software.
  7. Tools and small consumables go on Home and Office Shelving next to the workstation (from 796,000 UZS): W40 (40 cm) is for larger boxes and tools.

Safety and warranty

  • Keep racks in a dry spot. Place them away from the water tank used to check tyres for leaks and from the wash area: use in a damp place is not covered by the warranty.
  • Out of the way of cars. Do not put racks where cars drive in and turn: impacts are not covered either.
  • Do not throw tyres onto a shelf; set them down carefully: loads that are thrown on or dropped from above are not covered by the warranty.
  • A level floor and fixing. The rack stands on a level floor, is assembled according to the instructions and fixed in place; the load is spread evenly along the shelf.

The KingRax warranty lasts 12 months and covers the rack's ability to carry the maximum load stated on the warranty card. Details: Shelving warranty and Assembling and using shelving safely.

Next step

Send us the size of the room and the sizes and number of your tyres — in a free 2D/3D layout we will work out the placement and the price of the shelving. Warehouse racks: Medium-Duty Rack H200/L200/W60. If your shop also sells spare parts: Auto parts shop.

Useful guides

All guides

Metal shelving prices

H — height, L — length, W — width, D — shelf depth; sizes in centimetres.

Quick estimate

Enter the length of a wall or a row to see which shelving fits and what it costs. You can also get a rough layout from the room size.

Free 2D/3D Layout Leave a request