KingRax Guides Hardware store merchandising: heavy, small and hanging goods

Hardware store merchandising: heavy, small and hanging goods

A hardware store sells heavy boxes, small loose items and hanging tools on the same floor. So goods are displayed in three ways: heavy items on the bottom shelves, small parts in mesh-basket shelves, hanging goods on hooks.

Jalol Murad, KingRax General Manager 14.11.2026
GoodsWherePrice
Heavy items and large boxes (paint, household chemicals)Bottom shelf, 40 cm deep in the 40/35 systemincluded in the unit price
Small loose items (nails, screws, plugs)Mesh-basket shelf172,000 – 196,000 UZS
Hanging packs (tools, brushes, tape)Hook-rail shelf or a hook on a perforated panel172,000 – 196,000 UZS (shelf), 24,000 UZS (hook)
Offer goods at the end of a rowEnd-cap unit and side mesh160,000 – 196,000 UZS (side mesh)

Prices as of 14 November 2026. All accessories: Shelving Accessories.

Nam Asfalt (wet asphalt) wall shelving with perforated back panels and red price holders
Nam Asfalt (wet asphalt) wall shelving with perforated back panels and red price holders

Heavy goods: low and on a deep shelf

  • Paint tins, household chemicals and large boxes go on the bottom shelves. The bottom shelf rests on the upright's foot, and shoppers do not have to lift heavy items above their heads.
  • For large boxes the 40/35 system is convenient: the bottom shelf is 40 cm deep, the upper ones 35 cm.
  • Very heavy goods and reserve stock belong on warehouse shelving in the back room. Tell the manager how heavy your goods are and he will suggest a suitable rack.

Small goods: in baskets and dividers

Nails, screws, nuts, plugs and other small items get mixed up on an ordinary shelf. Put them in mesh-basket shelves (straight or sloped, L70 – L120) or small boxes, with a price holder under each basket. A sloped basket tilts goods towards the shopper and makes them easier to see.

Hanging goods: hooks and panels

  • Perforated back panel (on L90, L100 and L120 units) — shows goods on shelves and on hooks in one unit. A hook costs 24,000 UZS.
  • Mesh panel (for H195 units) — for hooks and baskets over the full height; suits a tools section.
  • Hook-rail shelf (L70 – L120) — a ready shelf with a rail and hooks that replaces an ordinary shelf.

Which panel to use when: Back panel types.

Nam Asfalt (wet asphalt) wall shelving with red price holders; on the right, a unit with a mesh panel
Nam Asfalt (wet asphalt) wall shelving with red price holders; on the right, a unit with a mesh panel

Floor layout

  1. Everyday goods at the back. Shoppers who come for household chemicals and consumables pass the other shelves on the way.
  2. Related groups side by side. Brushes and tape next to paint, plugs and sealant next to plumbing — everything needed in one place.
  3. Row ends for offers. End-cap shelving and side mesh suit seasonal and discounted goods: it is the most visible spot in a row. Details: End-cap shelving guide.
  4. Tall at the walls, lower in the middle. Units 225, 195 or 165 cm high along the walls and lower double-sided rows in the middle keep the floor easy to see across.

Example: a set for one wall

A wall of about 3 metres, 40/35 system:

ProductQtyTotal, UZS
Wall Shelving H195/L100/W5033,675,000
Single-Sided Upright H195/W50 — closes the run1184,000
Hook-Rail Shelf L100/W35 — one per unit3588,000
Straight Mesh-Basket Shelf L100/W352392,000
Total4,839,000

A ready solution for the whole floor: Shelving for hardware stores.

Summary

In a hardware store, put heavy goods low and on a deep shelf, small parts in baskets and tools on hooks, and give the row ends to offers. Send your store's size and a manager will prepare a free 2D/3D layout with the number of units, accessories and the price.

Useful guides

All guides

Metal shelving prices

H — height, L — length, W — width, D — shelf depth; sizes in centimetres.

Quick estimate

Enter the length of a wall or a row to see which shelving fits and what it costs. You can also get a rough layout from the room size.

Free 2D/3D Layout Leave a request