KingRax Guides How wide should the aisles in a shop be

How wide should the aisles in a shop be

Aisle width between shelving units by shop floor area: recommended and minimum sizes from 20 to 300 m², and the space by the entrance and the till.

Jalol Murad, KingRax General Manager 13.11.2026

The short answer

Shop floor areaRecommended aisleMinimum
20–50 m²100–120 cm80 cm
50–100 m²110–140 cm90 cm
100–150 m²130–160 cm110 cm
150–300 m²160–180 cm140 cm

If the area is exactly 50, 100 or 150 m², use the next, larger row. A shop under 20 m² uses the first row, one over 300 m² the last.

Nam Asfalt (wet asphalt) double-sided shelving with wire fences on the shelves
Nam Asfalt (wet asphalt) double-sided shelving with wire fences on the shelves

How an aisle is measured

An aisle is the distance between the floor footprints of two units — measured from the edge of the unit's base, not from the edge of a shelf. Floor depth of retail shelving:

SystemWall unitDouble-sided unit
35/3045 cm80 cm
40/3550 cm93 cm

Cross aisles at the ends of runs are measured the same way.

When an aisle can be narrower

The recommended width comes first. An aisle is made narrower in only two cases: when the shop cannot take the recommended aisles, or when otherwise one more run will not fit and too much space is left empty. Even then an aisle is never narrower than the minimum. Any space left over is shared equally between all aisles.

By the entrance and the till

  • No shelving goes in front of the door, across its full width, within 140 cm of it.
  • If you add a till, decide three things in advance: keep or remove the wall shelving behind it, how much room the cashier needs behind it and how much customers need in front of it.

Starting a run from a corner

In a corner — for example between a corner and the door — a new run starts only if at least an L100 unit fits there. Shorter units (L50–L70) end up behind the neighbouring wall run and are barely visible.

We can plan it for you

Send us your shop's measurements and a KingRax manager will prepare a plan with the aisles worked out by these rules: send a request.

Useful guides

All guides

Metal shelving prices

H — height, L — length, W — width, D — shelf depth; sizes in centimetres.

Quick estimate

Enter the length of a wall or a row to see which shelving fits and what it costs. You can also get a rough layout from the room size.

Free 2D/3D Layout Leave a request