KingRax Guides Drinks section: shelving, shelf depth and stoppers

Drinks section: shelving, shelf depth and stoppers

Drinks are heavy and round, so the section needs three things: sturdy wall shelving, a shelf depth that suits the bottle size, and a stopper on every shelf.

Jalol Murad, KingRax General Manager 13.11.2026
WhatSizePrice, UZS
Wall unit, 35/30H195/L1001,164,000
Wall unit, 40/35H195/L1001,225,000
StopperL50 – L12012,000
Price holderL50 – L12012,000

Prices as of 13 November 2026.

Nam Asfalt (wet asphalt) wall shelving with red price holders
Nam Asfalt (wet asphalt) wall shelving with red price holders

Shelf depth: how many rows fit

In the 35/30 system the shelves are 30 cm deep (the bottom one 35 cm); in the 40/35 system, 35 cm (the bottom one 40 cm). How many bottles fit from the back of the shelf to the front depends on their diameter (rough calculation):

PackDiameter, approx.30 cm shelf35 cm shelf
0.5 l6.5 cm4 rows5 rows
1 l8 cm3 rows4 rows
1.5 l9 cm3 rows3 rows
2 l10.5 cm2 rows3 rows

If you sell a lot of 2-litre and 1-litre bottles, the 40/35 system pays off: an L100 shelf takes about 27 two-litre bottles (9 across × 3 rows), against 18 on 35/30. At the same size a 40/35 unit costs 60,000–124,000 UZS more than 35/30. How the systems differ: 35/30 or 40/35.

A stopper on every shelf

A stopper is a plastic lip along the shelf edge: round bottles and cans don't slide forward and fall. In a drinks section it goes on every shelf, at 12,000 UZS each. With price holders, a 5-shelf unit needs 120,000 UZS of both. More: Price holders and stoppers.

Heavy goods at the bottom

  1. The deeper bottom shelf (35 or 40 cm) — for whole packs and the heaviest bottles.
  2. Middle shelves — the best-selling 1–1.5 litre drinks, at eye and hand level.
  3. Top shelves — light 0.5 litre bottles and cans.
  4. Spread the load evenly along the shelf. One shelf of a retail unit takes up to 50 kg in the 30/30 and 35/30 systems and up to 80 kg in 40/35 — a unit loaded beyond the stated load isn't covered by the warranty: Shelving warranty.

If a tall bottle doesn't fit, widen the gap between shelves: any shelf except the bottom one can be taken out.

Where the section goes

Drinks are heavy and in demand, so they often go along a wall, at the back or side of the floor: on the way, customers see other goods too. Wall units can be tall (H195 or H225) — they don't block the floor. About zones: Dividing a store floor into zones.

Next step

Send us your room size — in a free 2D/3D project we plan the whole shop with its drinks section and work out the price. Shelving: Wall shelving; stoppers and price holders: Shelving accessories.

Useful guides

All guides

Metal shelving prices

H — height, L — length, W — width, D — shelf depth; sizes in centimetres.

Quick estimate

Enter the length of a wall or a row to see which shelving fits and what it costs. You can also get a rough layout from the room size.

Free 2D/3D Layout Leave a request