KingRax Guides Moving shelving: taking it apart, transport and reassembly

Moving shelving: taking it apart, transport and reassembly

KingRax shelving is assembled from parts: uprights, shelves, back panels and accessories. That is why a unit can be taken apart, moved and put back together at a new place. What matters most is the order: call first, then empty, mark, dismantle, transport and reassemble on a level floor.

Doston J, KingRax Warehouse Manager 14.11.2026
StepWhat you do
1. Call+998 77 131-24-44 — before the move
2. EmptyRemove goods and accessories, label the boxes
3. MarkPhoto of each unit, numbers on the parts
4. DismantleTop to bottom, two people
5. TransportLying flat, cardboard between parts
6. ReassembleLevel floor, instructions, fixing
Rows of Nam Asfalt (wet asphalt) double-sided shelving in an empty sales hall
Rows of Nam Asfalt (wet asphalt) double-sided shelving in an empty sales hall

Before the move

  • Call us. The warranty does not cover shelving that has been moved to another place and reassembled. So call +998 77 131-24-44 first. You can get the assembly and use instructions from the same number. Warranty terms: Shelving warranty.
  • Measure the new place: length and width of the room, ceiling height, doors and stairs. The longest upright has to fit through the door and up the stairs.
  • Draw the new layout in advance. The units may not fit the way they did before: the wall lengths, the entrance and the checkout will be different. Send us the sizes and we will draw the new plan in a free 2D/3D project.
  • Plan the aisles as well: a shop and a warehouse need different widths. See Store aisle width and Warehouse aisle width between shelving.

Emptying and marking

  • Empty the shelves completely. Never push or lift a unit with goods on it: the upright bends and goods fall.
  • Pack goods by shelf. A label such as "row 1, unit 2, shelf 3" makes restocking at the new place faster.
  • Collect accessories separately. Price holders, stoppers, hooks and wire baskets — each unit's set in its own box.
  • Photograph every unit from the front and the side. The photo reminds you at what height each shelf was.
  • Mark the parts. Write the unit number on masking tape and stick it on the uprights and shelves. Do not write on the paint with a marker.

Taking it apart

  1. Top to bottom. First the accessories, then the upper shelves, then the bottom shelf, the back panels and finally the uprights.
  2. Two people. H195 and H225 uprights are long: one person holds, the other dismantles.
  3. No force. If a part does not come out, do not hit it with a hammer: it bends and the paint chips. Check the instructions or call us.
  4. Keep the small parts. One bag per unit, with the unit number on the bag.

Transport

  • Carry the parts lying flat. Uprights lengthwise, shelves stacked. Put cardboard or cloth between them so the paint is not scratched.
  • Do not put heavy loads on top. A bent shelf or upright will not sit straight at the new place.
  • The cargo bed must be at least as long as the longest upright. An upright is as long as the unit is tall: H195 means 195 cm, H225 means 225 cm.
  • Keep the parts away from rain and damp. Metal shelving is used in dry rooms. If parts get wet, wipe them with a dry cloth before assembly.

Reassembly at the new place

  1. The floor must be level. On an uneven floor the unit leans and the load shifts to one side.
  2. Assemble and fix the units as the instructions say. An unfixed unit is dangerous.
  3. Do not mix parts. Parts from another manufacturer may not fit, and such a unit is unsafe.
  4. Put the shelves back as in the photo, then fit the accessories.
  5. Restock from the bottom. Heavy goods low, light goods high, with the load spread along the shelf.
  6. Check. Are the uprights vertical, the shelves straight, the stoppers and price holders in place?

Detailed rules: Shelving safety: 10 rules for assembly and use. If you want us to do the assembly: Measuring and installation.

A move is also a good moment to inspect the shelving. What to look at: Metal shelving care.

If the new place is bigger

To extend a run, add a unit of the same system, height and depth — the parts fit each other. For example, Wall Shelving H195/L100/W45 costs 1,164,000 UZS. A lost or bent part can also be bought separately:

PartPrice, UZS
Single-Sided Upright H195/W45184,000
Shelf L100/W30184,000
Price Holder L10012,000
Stopper L10012,000

Prices as of 14 November 2026. All parts: Accessories. Extending a warehouse run: Warehouse shelving runs.

Frequently asked questions

Does the warranty stay valid after a move?

No: the warranty does not cover shelving that has been moved to another place and reassembled. That is why you should call +998 77 131-24-44 before the move.

Can a unit be moved assembled?

To another room or building — only in parts. An assembled unit will not fit through the door, and the uprights and shelves bend in transport.

What if the lease ends?

In a rented shop, choose standard sizes with a future move in mind. More: Shelving for a rented shop.

Next step

Send us the sizes of the new place — in a free 2D/3D project we will work out the layout and the price of any extra units.

Useful guides

All guides

Metal shelving prices

H — height, L — length, W — width, D — shelf depth; sizes in centimetres.

Quick estimate

Enter the length of a wall or a row to see which shelving fits and what it costs. You can also get a rough layout from the room size.

Free 2D/3D Layout Leave a request